Other information:
Open the liftgate.
Stop the liftgate movement by pressing
the control button on the liftgate when it
reaches the desired height.Note: Once the liftgate stops moving,
you
can manually move it to the desired height.
Press and hold the control button on the
liftgate until a tone sounds, indicating
programming is complete.Note: You can only use the liftgate control
button to program ..
Configuration
NOTE:
The engine and transmission must be at normal operating temperature.
Using the scan tool, clear the DTC and Transmission Adaptive Tables.
Bring the transmission to normal operating temperature.
Follow the table below to complete the Adaptive Learning Drive Cycle.
Test
Procedure
Transmission Warm ..