Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current SCCM installed. If the
current SCCM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair.
Using a diagnostic scan tool, begin..
WARNING:
Batteries contain sulfuric acid and produce explosive gases.
Work in a well-ventilated area. Do not allow the battery to come in
contact with flames, sparks or burning substances. Avoid contact with
skin, eyes or clothing. Shield eyes when working near the battery to
protect against possible splashing of acid solution. In case of acid
contact with skin or eyes, flush immed..