Other information:
Special Tool(s) /
General Equipment
Wooden Block
DISASSEMBLY
NOTICE:
Failure to follow the instructions below may result in damage to the TPMS .
NOTICE:
The TPMS
sensor is mounted to the valve stem. Removal of the valve stem
requires dismounting the tire from the wheel and removal of the TPMS sensor.
NOTE:
Use only the Digital Tire Pressure Gauge any time tire
pressures ..
Removal
Remove the valve cover.
Refer to: Valve Cover (303-01A Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
Remove the high-pressure fuel pump drive unit bolts, then remove the high-pressure fuel pump drive unit.
Installation
Make sure that the mating faces are clean and free of
corrosion and foreign mater..