The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and function the same as a warning lamp, but do not display when you start your vehicle.
Adaptive Cruise Control (If Equipped)
The speed control system
indicator
light changes color to indicate
what mode the system is in.
On (white light): Illuminates when you switch on the adaptive cruise control system. Turns off when the speed control system is turned off.
Engaged (green light): Illuminates when you engage the adaptive cruise control system. Turns off when you disengage the speed control system.
Anti-Lock Braking System
If it illuminates when you are
driving, this indicates a system
error. You continue to have the
normal braking (without ABS) unless the
brake system warning lamp also illuminates.
Have the system checked immediately.
Automatic High Beam Control (If Equipped)
Illuminates when this feature is
on.
Auto Hold Active
Illuminates when the system holds
your vehicle stationary.
Auto Hold Unavailable
Illuminates when the system is
on,
but unavailable to hold your
vehicle stationary.
Auto Start-Stop (If Equipped)
Illuminates to inform you when
the
engine shuts down or in
conjunction with a message.
Battery
If it illuminates while driving,
it
indicates a system error. Switch off
all unnecessary electrical
equipment and have the system checked
immediately.
Blind Spot Monitor (If Equipped)
Illuminates when you switch this
feature off or in conjunction with a
message.
Brake System Warning Lamp
WARNING: Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
This lamp is a dual function lamp and illuminates when:
If the lamp illuminates when you
are moving, you may have the
parking brake applied. Make sure
the parking brake is off. Have your
vehicle checked as soon as
possible if the lamp continues to
illuminate.
Note: Indicator varies depending on region.
Cruise Control (If Equipped)
Illuminates when you switch this
feature on.
Direction Indicator
Illuminates when you switch on
the
left or right direction indicator or
the hazard flasher. If the indicators
stay on or flash faster, check for a burned
out bulb.
Distance Alert
Flashes when your vehicle is
rapidly approaching another
vehicle or a pedestrian within your
driving path.
Door Ajar
Illuminates when the ignition is
on
and any door is not completely
closed.
Electric Parking Brake
Illuminates or flashes when the
electric parking brake has a system
error.
Note: Indicators vary depending on region.
Engine or Motor Coolant Temperature
Illuminates when your vehicle
coolant temperature is high. Stop
your vehicle as soon as possible,
switch off the engine and let it cool.
Engine Oil
If it illuminates with the
engine
running or when you are driving,
this indicates a system error. Stop
your vehicle as soon as it is safe to do so
and switch the engine off. Check the engine
oil level.
Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked immediately.
Fasten Seatbelt
Illuminates and a tone sounds to
remind you to fasten your seatbelt.
Fasten Rear Seatbelt (If Equipped)
Illuminates and a tone sounds to
signal the rear seatbelts are not
fastened.
Front Airbag
If it fails to illuminate when
you
start your vehicle, continues to
flash or remains on, it indicates
there is a system error. Have the system
checked as soon as possible.
Front Fog Lamps (If Equipped)
Illuminates when you switch the
front fog lamps on.
High Beam
Illuminates when you switch the
high beam headlamps on. It flashes
when you use the headlamp
flasher.
Hood Ajar
Illuminates when the ignition is
on
and the hood is not completely
closed.
Lamps On
Illuminates when you switch the
low beam headlamps or the
parking lamps on.
Liftgate Ajar
Illuminates when the liftgate is
not
completely closed.
Low Beam Warning
Illuminates when the low beam
headlamp bulb is not functioning
properly.
Low Fuel Level
Illuminates when the fuel level
is
low or the fuel tank is nearly
empty. Refuel as soon as possible.
Low Tire Pressure Warning
Illuminates when your tire
pressure
is low. If the lamp remains on with
the engine running or when
driving, check your tire pressure as soon as
possible.
It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked as soon as possible.
Low Washer Fluid
Illuminates when the windshield
washer fluid is low.
Powertrain Fault
Illuminates when the system
detects a powertrain or a
4WD/AWD fault. Have your vehicle
checked as soon as possible.
Ready to Drive
Illuminates when you switch on
your vehicle and it is ready to
drive. A corresponding message
may appear in the information display.
Service Engine Soon
Illuminates when you switch the
ignition on prior to engine start to
check the bulb and to indicate
whether your vehicle is ready for Inspection
and Maintenance (I/M) testing.
Normally, it illuminates until the engine is cranked and automatically turns off if no system errors are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing.
If it illuminates when the engine is running this indicates a system error. The On Board Diagnostics system has detected an error in the vehicle emission control system.
If it flashes, engine misfire may be occurring. Continuing to drive your vehicle may cause reduced power or the engine to stop. Failure to respond to the warning lamp may cause component damage not covered by the vehicle Warranty. Have your vehicle checked as soon as possible.
Stability Control
It flashes when the system is
active. If it remains illuminated or
does not illuminate when you
switch the ignition on, this indicates a system
error. During a system error, the system
switches off. Have the system checked
immediately.
Stability Control Off
Illuminates when you switch the
system off. It goes out when you
switch the system back on or when
you switch the ignition off.
Stop Safely Now
Illuminates if your vehicle has
an
electrical component fault or failure
that will cause your vehicle to
shutdown or enter into a limited operating
mode. A message may also display.
Tow Haul Indicator (If Equipped)
Illuminates when the system
switches on.
Vehicle Plugged In
Illuminates when your vehicle is
plugged in. A corresponding
message may display after
attempting to start your vehicle.
WARNING: Do not adjust the steering wheel when your vehicle is moving.
Note: Make sure that you are sitting in the correct position.