Other information:
Removal
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
Remove the LH front fender splash shield.
Refer to: Fender Splash Shield (501-02 Front End Body Panels, Removal and Installation).
Disconnect the TSS sensor electrical connector.
..
Check
NOTE:
Refer to the appropriate Section 303-01 for the specifications.
NOTE:
The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston.
Measure the cylinder bore in 2 directions.
Select a piston size based on the cylinder bore.
NOTE:
For precision fit, new pistons are divided into 3 ..