Materials
Name
Specification
Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A
ESA-M1C200-AESE-M1C171-A
Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B, APM-4-C
-
Removal
WARNING:
Service actions on vehicles equipped with electronic brake
booster and electronic parking brakes may cause unexpected brake
application, wh..
Other information:
Using the Valet Mode
Press Settings on the touchscreen.
Press Valet Mode.
Note: Have your Backup Start Passcode
completely setup before using Valet Mode.
Note: Once the system detects a valid Phone
as a Key, the temporary passcode displays
in both the touchscreen and mobile app. If
the system does not detect a valid Phone as
a Key, it prompts you to enter your Backup
Start Passcode. Once..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new all-wheel drive module, it is necessary
to upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
all-wheel drive module after installation. Using a diagnostic scan tool,
begin the PMI process for ..