Lincoln Corsair: Rear Electric Drive Assembly / Removal and Installation - Intermediate Shaft Seal
Removal and Installation
-
In order to replace the intermediate shaft seal and the
dust shield, the seal and the dust shield is replaced by removing and
installing the intermediate shaft.
Refer to: Intermediate Shaft (205-05 Rear Drive Halfshafts, Removal and Installation).
Special Tool(s) /
General Equipment
205-153
(T80T-4000-W)
Handle
205-990Installer, Axle SealTKIT-2012A-FLTKIT-2012A-ROW
Removal
Remove the RH rear halfshaft...
Special Tool(s) /
General Equipment
Ford Diagnostic Equipment
Fluid Container
Removal
With the vehicle in NEUTRAL, position it on a hoist...
Other information:
Special Tool(s) /
General Equipment
307-771Accumulator Release Pin
Materials
Name
Specification
Petroleum Jelly
-
Removal
Remove the battery tray.
Refer to: Battery Tray - 2.0L EcoBoost (177kW/240PS) – MI4/2...
Removal
Remove the valve cover.
Refer to: Valve Cover (303-01A Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
Remove the high-pressure fuel pump drive unit bolts, then remove the high-pressure fuel pump drive unit...