Lincoln Corsair: Reverse Braking Assist / Switching Reverse Braking Assist On and Off. Overriding Reverse Braking
Assist. Reverse Braking Assist Indicators
Switching Reverse Braking Assist On and Off
You can switch the system on or off through
the touchscreen.
Note: The system is unavailable when rear
parking aid or cross traffic alert is off.
Overriding Reverse Braking Assist
There could be instances when unexpected
or unwanted braking occurs. Firmly pressing
the accelerator pedal or switching the feature
off overrides the system.
Reverse Braking Assist Indicators
If the system determines that a collision with
an obstacle may occur, full braking may
apply. Bring your vehicle to a stop a safe
distance away from the obstacle.
A message and warning indicator
appear when the system applies
the brakes.
What Is Reverse Braking Assist
The system is designed to reduce impact
damage or avoid a collision completely by
using the sensors on the rear of your vehicle...
Reverse Braking Assist – Information Messages
Reverse Braking Assist – Frequently Asked Questions
Why is reverse braking assist unavailable?
Make sure that all doors, liftgate and
hood are closed...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
PCM
P0068:00
MAP / MAF - Throttle Position Correlation: No Sub Type Information
GO to Pinpoint Test DV
PCM
P0120:00..
What are the Alarm Security Levels
You can select two levels of alarm security,
all sensors and perimeter sensing.
All Sensors
All sensors is the standard setting.
In all sensors, all equipped sensors are on
when you arm the alarm.
Note: Do not arm the alarm with all sensors
if passengers, animals or other moving
objects are inside your vehicle.
Perimeter Sensing
In perimeter sensing, the inte..