Lincoln Corsair Manuals

Lincoln Corsair: Engine - 2.0L EcoBoost (177kW/240PS) – MI4 / Specifications


  Engine


Item Specification
Displacement 122  in³ ( 2  L)
No. of cylinders 4
Bore 3.4449  in ( 87.5  mm)
Stroke 3.2717  in ( 83.1  mm)
Spark plug 12405
Spark plug gap   0.030  in ( .75  mm)
Firing order 1-3-4-2
Compression ratio 10.0:1
Engine weight - (without accessory drive components and flexplate) 287  lb ( 130  kg)

  Lubricants


Item Specification
All except China — Material: Motorcraft® SAE 5W-30 Synthetic Blend Motor Oil / XO-5W30-Q1SP (WSS-M2C961-A1) WSS-M2C961-A1, 5W30
China only - initial engine oil fill and service fill — Material: Engine Oil - SAE 5W-30 (WSS-M2C217-A1) WSS-M2C217-A1, 5W30
China only - service only fill — Material: Engine Oil - SAE 5W-30 - Synthetic Blend Motor Oil / XO-5W30-Q1SP (WSS-M2C946-B1) WSS-M2C946-B1, 5W30
Argentina only — Material: Engine Oil - SAE 5W-30 (WSS-M2C913-D) WSS-M2C913-D, 5W30

  Engine Oil Capacity


Item Specification
Service fill including oil filter 5.5  qt ( 5.2  L)

  Oil Pressure


Item Specification
Oil pressure @ 1,500 rpm with engine oil temperature between 121.9 –175.9 °F ( 50 –80 °C) 27.6 –37.7  psi ( 190 –260  kPa)

  Cylinder Block


Item Specification
Cylinder bore diameter 3.4449 –3.4457  in ( 87.5 –87.52  mm)
Cylinder bore maximum out-of-round 0.0003  in ( .008  mm)
Main bearing bore diameter 2.245 –2.246  in ( 57.018 –57.04  mm)
Head gasket surface flatness 0.1 mm (0.0039 in) - 0.05 mm (0.002 in)/200 mm (7.874 in) x 200 mm (7.874 in)

  Piston


Item Specification
Piston diameter nominal (DN) height from top of piston 1.5945  in ( 40.5  mm)
Piston diameter 3.4428 –3.4433  in ( 87.446 –87.46  mm)
Piston-to-bore clearance 0.0016 –0.0029  in ( .04 –.074  mm)
Piston ring groove width - compression (top) 0.0484 –0.0492  in ( 1.23 –1.25  mm)
Piston ring groove width - compression (bottom) 0.0484 –0.0492  in ( 1.23 –1.25  mm)
Piston ring groove width - oil 0.0799 –0.0807  in ( 2.03 –2.05  mm)
Piston skirt coating thickness 0.0003 –0.0007  in ( .007 –.017  mm)

  Piston Pin


Item Specification
Diameter 0.8857 –0.8858  in ( 22.497 –22.5  mm)
Length 2.1929 –2.2047  in ( 55.7 –56  mm)
Piston-to-pin clearance 0.0002 –0.0005  in ( .005 –.013  mm)
Piston pin-to-connecting rod clearance 0.0008 –0.0012  in ( .021 –.03  mm)
Piston ring width - compression (top) 0.05  in ( 1.18  mm)
Piston ring width - compression (bottom) 0.05  in ( 1.18  mm)
Piston ring width - oil 0.08  in ( 2  mm)
Piston ring gap (in bore) - compression (top) 0.0067 –0.0106  in ( .17 –.27  mm)
Piston ring gap (in bore) - compression (bottom) 0.0157 –0.0236  in ( .4 –.6  mm)
Piston ring gap (in bore) - oil 0.0059 –0.0177  in ( .15 –.45  mm)
Connecting rod bearing-to-crankshaft clearance 0.0011 –0.0020  in ( .027 –.052  mm)
Connecting rod bearing thickness 0.0589 –0.0598  in ( 1.495 –1.519  mm)
Connecting rod crankshaft bore diameter 2.1665 –2.1670  in ( 55.028 –55.042  mm)
Connecting rod pin bore diameter 0.8867 –0.8869  in ( 22.521 –22.527  mm)
Connecting rod length (center-to-center) 6.1366  in ( 155.869  mm)
Connecting rod side clearance (assembled-to-crankshaft) 0.0055 –0.0142  in ( .14 –.36  mm)
Axial clearance 0.0055 –0.0142  in ( .14 –.36  mm)

  Crankshaft


Item Specification
Main bearing journal diameter 2.0464 –2.0473  in ( 51.978 –52.002  mm)
Main bearing clearance 0.0006 –0.0018  in ( .016 –.046  mm)
Connecting rod journal diameter 2.0464 –2.0473  in ( 51.978 –52.002  mm)
End play 0.0087 –0.0177  in ( .22 –.45  mm)

  Cylinder Head


Item Specification
Cylinder head flatness 0.08 mm (0.0031 in) maxim overall, a maximum of 0.05 mm (0.0020 in) within 150 mm (5.9055 in) and a maximum of 0.025 mm (0.0010 in) within 25 mm (0.9843 in)
Maximum valve lift @ zero lash (exhaust) 0.307  in ( 7.8  mm)
Maximum valve lift @ zero lash (intake) 0.354  in ( 8.986  mm)
Valve guide diameter 0.2169 –0.2181  in ( 5.509 –5.539  mm)
Valve seat width - intake 0.0472 –0.0630  in ( 1.2 –1.6  mm)
Valve seat width - exhaust 0.0630 –0.0787  in ( 1.6 –2  mm)
Valve seat angle 44.75 °
Valve seat runout 0.030  in ( .75  mm)
Valve tappet bore diameter 1.2205 –1.2217  in ( 31 –31.03  mm)
Cam bore diameter 0.9848 –0.9858  in ( 25.015 –25.04  mm)

  Valve


Item Specification
Valve head diameter - intake 1.2795  in ( 32.5  mm)
Valve head diameter - exhaust 1.1811  in ( 30  mm)
Valve stem diameter - intake 0.2157  in ( 5.48  mm)
Valve stem diameter - exhaust 0.2150  in ( 5.46  mm)
Valve stem-to-guide clearance - intake 0.0009 –0.0027  in ( .024 –.069  mm)
Valve stem-to-guide clearance - exhaust 0.0015 –0.0035  in ( .039 –.089  mm)
Valve face runout 0.002  in ( .05  mm)
Valve face angle 45 –45.5 °

  Valve Spring  Compression Pressure


Item Specification
Intake (installed) 40  lb ( 180  N)
Exhaust (installed) 52  lb ( 230  N)
Intake (valve open) 9.2 mm (0.3622 in) of lift 103  lb ( 460  N)
Exhaust (valve open) 9.2 mm (0.3622 in) of lift 126  lb ( 560  N)
Free length-Intake 1.8860  in ( 47.904  mm)
Free length-Exhaust 1.8583  in ( 47.2  mm)
Assembled height 1.4921  in ( 37.9  mm)

  Valve Tappet


Item Specification
Diameter 1.2197 –1.2191  in ( 30.98 –30.964  mm)
Tappet-to-valve clearance - intake 0.0075 –0.0122  in ( .19 –.31  mm)
Tappet-to-valve clearance - exhaust 0.0118 –0.0165  in ( .3 –.42  mm)
Tappet-to-bore clearance 0.0008 –0.0028  in ( .02 –.07  mm)

  Camshaft


Item Specification
Intake lobe lift 0.354  in ( 8.98  mm)
Exhaust lobe lift 0.307  in ( 7.8  mm)
Runout 0.0012  in ( .03  mm)
Thrust clearance 0.0035 –0.0094  in ( .09 –.24  mm)
Journal diameter 0.9827 –0.9835  in ( 24.96 –24.98  mm)
Journal-to-bore clearance 0.0014 –0.0031  in ( .035 –.08  mm)
Torque Specifications
Engine oil pan drain plug - 27 Nm (20 lb-ft)
Engine oil filter - 8 Nm (71 lb-in) - plus an additional 180 degrees

    Engine - 2.0L EcoBoost (177kW/240PS) – MI4

    ..

    Description and Operation - Engine - Overview

    Overview The 2.0L GTDI engine which may also be described with these terms: GTDI - Gasoline turbocharged direct injection DI - Direct injection TIVCT - Twin independent Variable Camshaft Timing I4 - 4 cylinder engine 16 V - 4 valves per cylinder 4V - 4 valves per cylinder, 16 valves total 2...

    Other information:

    Lincoln Corsair 2020-2022 Service Manual: Removal and Installation - Engine Front Cover


    Special Tool(s) / General Equipment 303-096 (T74P-6150-A) Installer, Camshaft Front Oil SealTKIT-2009TC-F 303-1521Alignment Tool, Crankshaft Position SensorTKIT-2010C-FLM 303-1685Alignment Tool, Camshaft 303-1689Holding Tool, Crank Damper 303-409 (T92C-6700-CH) Remover, Crankshaft SealTKIT-1992-FH/FMH/FLMHTKIT-1993-LMH/MH 303-507Timing Peg, Crankshaft ..

    Lincoln Corsair 2020-2022 Owners Manual: Automatic Transmission Fluid Check. Brake Fluid Check


    Automatic Transmission Fluid Check The automatic transmission does not have a transmission fluid dipstick. The automatic transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, for example if the transmission slips or shifts slowly or if you notice some sign of fluid leakage. Note: Transmission fluid should be checked by a..

    Categories

    Information on P Type Tires

    Lincoln Corsair. Information on P Type Tires

    P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below. (Note that the tire size, load index and speed rating for your vehicle may be different from this example.)

    P: Indicates a tire, designated by the Tire and Rim Association, that may be used for service on cars, sport utility vehicles, minivans and light trucks. Note: If your tire size does not begin with a letter this may mean it is designated by either the European Tire and Rim Technical Organization or the Japan Tire Manufacturing Association. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire. 65: Indicates the aspect ratio which gives the tire's ratio of height to width. R: Indicates a radial type tire. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. 95: Indicates the tire's load index. It is an index that relates to how much weight a tire can carry. You may find this information in your owner’s manual. If not, contact a local tire dealer.

    read more

    Copyright © 2022 www.licorsair.com