Lincoln Corsair: Handles, Locks, Latches and Entry Systems / Removal and Installation - Keyless Entry Rear Antenna
Removal
-
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
-
Remove the keyless entry rear antenna.
-
Disconnect the keyless entry rear antenna electrical connector.
-
Release the retainers and remove the keyless entry rear antenna.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
The keyless entry keypad is serviced as an assembly with the front door upper moulding.
Remove the front door upper moulding...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Other information:
Item
Description
1
Downshift paddle switch
2
Upshift paddle switch
3
Transmission park by wire release cable
4
GSM
..
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Repair individual door lock cylinders by discarding the
inoperative door lock cylinder and building a new door lock cylinder
using the appropriate lock repair service kit. The lock repair service
kit includes a detailed instruction sheet to build the new lock to match
the key cut pattern for the vehicle, thus ..