Lincoln Corsair: Rear View Mirrors / Removal and Installation - Interior Rear View Mirror
Special Tool(s) /
General Equipment
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
NOTE:
Interior rear view mirror removed for clarity.
Remove the IPMA cover.
-
Release the IPMA clips and the tether clip from the IPMA cover.
Use the General Equipment: Interior Trim Remover
-
Rotate the tether clip line to align the end with the opening in the IPMA cover.
-
Slide the tether clip end out of the IPMA cover.
-
NOTE:
Interior rear view mirror removed for clarity.
NOTE:
Follow the unique instructions or graphic for this step in the installation.
Remove and discard the IPMA cover tether clip.
-
Release the IPMA cover tether clip front tabs.
Use the General Equipment: Interior Trim Remover
-
Release the IPMA cover tether clip rear tabs.
Use the General Equipment: Interior Trim Remover
-
Disconnect the interior rear view mirror electrical connector.
-
Remove the interior rear view mirror.
-
Loosen the set screw.
Torque:
17 lb.in (1.9 Nm)
-
Slide the interior rear view mirror upward.
Installation
-
To install, reverse the removal procedure.
-
Connect the tether clip to the IPMA cover.
-
Install the tether clip onto the IPMA cover.
-
Rotate the tether clip line to align the end with the opening in the IPMA cover.
-
Slide the tether clip end into the IPMA cover.
Special Tool(s) /
General Equipment
Flat Headed Screw Driver
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
Removal
Remove the charge air cooler (CAC) outlet pipe.
Refer to: Charge Air Cooler (CAC) Outlet Pipe (303-12A Intake Air
Distribution and Filtering - 2.0L EcoBoost (177kW/240PS) – MI4, Removal
and Installation).
Refer to: Charge Air Cooler (CAC) Outlet Pipe (303-12B Intake Air
Distribution and Filtering - 2.3L EcoBoost (199kW/270PS), Removal and
Installation).
NO..
Special Tool(s) /
General Equipment
Pick Hook
Interior Trim Remover
Removal
NOTE:
LH (left hand) shown, RH (right hand) similar.
NOTE:
Removal steps in this procedure may contain installation details.
Release the clips and remove the interior front door handle bolt cover.
Use the General Equipment: Pick Hook
Remove the interio..