Lincoln Corsair: Interior Trim and Ornamentation / Removal and Installation - Front Door Trim Panel

Special Tool(s) / General Equipment

Removal

NOTE: LH (left hand) shown, RH (right hand) similar.

NOTE: Removal steps in this procedure may contain installation details.

1. Release the clips and remove the interior front door handle bolt cover.
   Use the General Equipment: Pick Hook

1. Remove the interior front door handle bolt.
   Torque: 17 lb.in (1.9 Nm)

1. Remove the window control switch.
   Refer to: Driver Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation).
   Refer to: Passenger Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation).
   

1. Remove the front door trim panel bolt.
   Torque: 22 lb.in (2.5 Nm)

1. Release the tab and remove the front door trim panel bolt cover.
   Use the General Equipment: Pick Hook

1. Remove the front door trim panel bolt.
   Torque: 8 lb.in (0.9 Nm)

1. Remove the front door trim panel lower bolts.
   Torque: 13 lb.in (1.5 Nm)

1. Release the front door trim panel clips.
   Use the General Equipment: Interior Trim Remover

1. 
   Remove the front door trim panel.
   
   1. Release the tabs and position the interior front door cable aside.
      
   2. Disconnect the front seat control switch electrical connector.
      
   3. If equipped.
      Disconnect the front door tweeter speaker electrical connector.
      
   4. Disconnect the door lock indicator electrical connector.
      

Installation

1. NOTE: Transfer parts as necessary.

   To install, reverse the removal procedure.