Lincoln Corsair: Front End Body Panels / Removal and Installation - Engine Front Undershield
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Lifting)
.
-
Remove the bolts and the engine front undershield.
Torque:
13 lb.in (1.5 Nm)
Installation
-
To install, reverse the removal procedure.
Removal
Remove the windshield wiper pivot arm.
Refer to: Windshield Wiper Pivot Arm (501-16 Wipers and Washers, Removal and Installation).
If equipped...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
On both sides...
Other information:
Check
NOTICE:
Non-Hunter brand balancers will not include the Ford-approved procedure for match-mounting in their software.
NOTICE:
Other balancing procedures that exist on non-Hunter brand equipment are not Ford approved and should not be used...
Materials
Name
Specification
Motorcraft® Ultra-Clear Spray Glass CleanerZC-23
ESR-M14P5-A
Repair
Bring the vehicle up to at least the specified room temperature or above.
NOTE:
The new terminal covers the original terminal
location, but it must be placed so the terminal conductive areas will be
placed on a good conductive base...