Lincoln Corsair: Information Displays / Information Messages

Move the selector switch to the
right to acknowledge and remove
some messages from the
information display. Other messages will be
removed automatically after a short time.
Certain messages need to be confirmed before you can access the menus.
Active Park

Adaptive Cruise Control (If Equipped)

Adaptive Headlamps (If Equipped)

AdvanceTrac™ and Traction Control

Alarm

Automatic Engine Shutdown

AWD

Battery and Charging System (12 Volt)

Battery and Charging System (High Voltage)

Blind Spot Information and Cross Traffic Alert System

Doors and Locks


Driver Alert

Fuel

Hill Start Assist

Keys and Intelligent Access

Lane Keeping System

Maintenance


MyKey

Park Aid

Park Brake


Power Steering

Pre-Collision Assist

Remote Start

Seats

Starting System

Tire Pressure Monitoring System

Transmission


Information On Demand
Note: On Demand information appears on the right-hand side of the
instrument cluster in single gauge view and in the center of the instrument
cluster in dual gauge view when you switch on certain drive modes...
The head up display (HUD) is a visual system
that shows information in your field of view
as you drive. The information comes from
various vehicle systems and includes vehicle
speed, speed limit, navigation, and advanced
driver assistance systems such as adaptive
cruise control and the lane keeping system...
Other information:
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Spherical Cutter
Plasma Cutter
Hot Air Gun
Air Body Saw
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055
-
Seam ..
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Crankshaft main bearing journals must be within specifications before checking journal clearance.
Remove the crankshaft main bearing cap and crankshaft main bearing.
Position a piece of Plastigage across the crankshaft main bearing surface.
NOTE:
Do not turn..