Lincoln Corsair: Engine System - General Information / General Procedures - Crankshaft End Play
General Equipment
| Dial indicator |
| Dial indicator fixture |
-
NOTE:
Refer to the appropriate Section 303-01 for the specification.
-
Position the crankshaft to the rear of the cylinder block.
-
Zero the Dial Indicator Gauge with Holding Fixture.Dial Indicator
-
Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
-
If the crankshaft end play exceeds the specified range, install new parts as necessary.
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
The crankshaft connecting rod journals must be
within specifications to check the connecting rod bearing journal
clearance...
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Crankshaft main bearing journals must be within specifications before checking journal clearance...
Other information:
Materials
Name
Specification
Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV
WSS-M2C949-A, MERCON® ULV
DISASSEMBLY
Remove the bolts and the pump assembly.
Remove the bolt and the filter assembly...
System Operation
Item
Description
1
BCM
2
Roof Opening Panel Control Switch
3
Sliding Glass Motor / Module
4
Shade Motor
Roof Opening Panel Operating System
The accessory delay relay in the BCM
supplies voltage through fuse F6 (10A) to the sliding glass motor /
module allowing the motors to respond to roof opening panel control
sw..