Lincoln Corsair: Lighting / Front Fog Lamps (IF EQUIPPED)
Switching the Front Fog Lamps On or Off
Only switch the front fog lamps on during
reduced visibility.
You can switch the front fog lamps on if any
of the following occur:
- You set the lighting control to the parking
lamps position.
- You set the lighting control to the
headlamps position.
- You set the lighting control to the
autolamps position and the headlamps
are on.
The front fog lamp button is on the lighting
control.
Press the button to switch the
front
fog lamps on or off.
Note: The brightness of the daytime running
lamps may decrease when the front fog
lamps are switched on.
Front Fog Lamp Indicator
It illuminates when you switch
the
front fog lamps on.
Daytime Running Lamps - Vehicles With: Configurable Daytime Running Lamps
WARNING: The daytime running
lamps system does not activate the rear
lamps and may not provide adequate
lighting during low visibility driving
conditions...
About Adaptive Headlamps
The headlamps are designed to adapt when
you are steering around a curve, or if the
camera detects lane markings indicating a
curve or traffic signs indicating an
intersection...
Other information:
Lubricants, Fluids, Sealers and Adhesives
Specifications
DOT 4 LV brake fluid
Material: Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid
/ PM-20
(WSS-M6C65-A2)
Torque Specifications
Item
Nm
lb-ft
lb-in
Front caliper bleeder scre..
Removal
NOTICE:
The turbocharger compressor vanes can be damaged by even the
smallest particles. When removing any turbocharger or engine air intake
system component, ensure that no debris enters the system. Failure to
do so may result in damage to the turbocharger.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and ..