Lincoln Corsair Manuals

Lincoln Corsair: Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40 / Description and Operation - A Clutch

A Clutch Exploded View

Item Description
1 Snap ring
2 A (1, 2, 3, 4, 5) clutch pressure plate
3 A (1, 2, 3, 4, 5) clutch friction plates
4 A (1, 2, 3, 4, 5) clutch steel plates
5 A (1, 2, 3, 4, 5) clutch apply plate
6 Snap ring
7 A (1, 2, 3, 4, 5) clutch piston return spring
8 A (1, 2, 3, 4, 5) clutch piston
9 A (1, 2, 3, 4, 5) clutch piston seals
10 Hydraulic SOWC

A Clutch Hydraulic Circuits

Item Description
1 Line pressure
2 Clutch exhaust
3 A (1, 2, 3, 4, 5) clutch control
4 SSA /control valve
5 A (1, 2, 3, 4, 5) clutch pressure sensor
6 Mechanical A (1, 2, 3, 4, 5) clutch

A Clutch Hydraulic Operation

Line pressure is supplied to the A (1, 2, 3, 4, 5) clutch control valve. As SSA turns on, it moves the A (1, 2, 3, 4, 5) clutch control valve allowing regulated line pressure to flow to the mechanical A (1, 2, 3, 4, 5) clutch.

A Clutch Hydraulic Passages

    Description and Operation - Transmission Description - System Operation and Component Description

    S..

    Description and Operation - B Clutch

    B Clutch Exploded View Item Description 1 Snap ring 2 B (4, 6, R) clutch apply plate 3 B (4, 6, R) clutch piston seals 4 B (4, 6, R) clutch pistons 5 B (4, 6, R) clutch piston return spring 6 B (4, 6, R) clutch fiber plates 7 B (4, 6, R) clutch steel plates ..

    Other information:

    Lincoln Corsair 2020-2026 Service Manual: Removal and Installation - Brake Disc


    Materials Name Specification Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B, APM-4-C -  Removal   WARNING: Service actions on vehicles equipped with electronic brake booster and electronic parking brakes may cause unexpected brake application, which could result in injury to hands or fingers. Put the brake system into service mode prior to servicing or re..

    Lincoln Corsair 2020-2026 Service Manual: Removal and Installation - Steering Column Control Module (SCCM)


    Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: This step is only necessary when installing a new component. NOTE: The PMI process must begin with the current SCCM installed. If the current SCCM does not respond to the diagnostic scan tool, the tool may prompt for As-Built Data as part of the repair. Using a diagnostic scan tool, begin..

    Categories

    Second Stage: Checking Tire Pressure

    WARNING: If the tire does not inflate to the recommended tire pressure within 15 minutes, stop and call roadside assistance.

    WARNING: The power plug may get hot after use and should be handled carefully when unplugging.

    Check the air pressure of your tires as follows:

    Lincoln Corsair. Second Stage: Checking Tire Pressure

    read more

    Copyright © 2026 www.licorsair.com