Lincoln Corsair: Drive Mode Control / What Is Drive Mode Control
The system delivers a driving experience
through a suite of sophisticated electronic
vehicle systems. These systems optimize
steering, handling and powertrain response.
This provides a single location to control
multiple systems performance settings.
Changing the drive mode automatically
changes the functionality of the following
systems:
- Electronically power-assisted steering
system adjusts steering effort and feel
based on the mode you select.
- Electronic stability control and traction
control maintains your vehicle control in
adverse conditions or high performance
driving.
- Electronic throttle control enhances the
powertrain response to your driving
inputs.
- Transmission controls optimize with shift
schedules tuned to each mode.
- AWD settings become optimized and
tuned to each mode.
The system automatically tailors your vehicle
configuration for each mode you select.
Note: Not all settings, or modes, may be
available.
Note: The system has diagnostic checks that
continuously monitor the system for proper
operation. If a mode is unavailable due to a
system fault, the mode defaults to Normal.
Selecting a Drive Mode
Note: Drive mode changes may not be
available when the ignition is off.
Rotate the drive mode dial on the center
console to change the drive mode...
Other information:
Removal
NOTE:
The heated rear seat module is located under the LH (left hand) rear seat cushion substrate.
Remove the heated rear seat module.
Remove the pin-type retainer.
Remove the heated rear seat module from the rear seat cushion substrate...
Removal
Remove the camshafts.
Refer to: Camshafts (303-01A Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
If the camshafts and valve tappets are to be reused,
make sure they are assembled in their original positions...