Special Tool(s) /
General Equipment
Tie Rod End Remover
Transmission Jack
Materials
Name
Specification
Motorcraft® Metal Brake Parts CleanerPM-4-A, PM-4-B, APM-4-C
-
Removal
NOTICE:
Disconnect the battery ground cable anytime the
steering gear is being serviced or damage to the steering gear internal
power relay may occur resulting in steering gear..
Other information:
Special Tool(s) /
General Equipment
Dial Indicator
Check
Verify that the cylinder block deck surface and the pistons are clean.
The piston protrusion is measured in-line front and rear avoiding raised or etched marking.
NOTE:
Use a commercially available deck bridge such as the Proform® 66797 Magnetic Deck Bridge or equivalent.
..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02)
.
Remove the push pins, the screws and the lower bumper
cover bracket assembly. Position the hands-free liftgate actuation lower
sensor aside.
Disconnect the hand..