Lincoln Corsair: Automatic Transmission - Automatic Transmission – HF45 / Removal and Installation - Inverter System Controller
Removal
-
To remove the ISC (inverter system controller).
Refer to: Inverter System Controller [SOBDMC] (303-14D Electric Powertrain Control, Removal and Installation).
Installation
-
To install, reverse the removal procedure.
Special Tool(s) /
General Equipment
205-153
(T80T-4000-W)
Handle
307-758Installer, Axle Seal -FWD
Flat Headed Screw Driver
Removal
Remove the RH halfshaft...
Special Tool(s) /
General Equipment
Wooden Block
Removal
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Roll Restrictor RH (307-01B Automatic Transmission - Automatic Transmission – HF45, Removal and Installation)...
Other information:
Removal
WARNING:
The following procedure prescribes critical repair steps
required for correct restraint system operation during a crash. Follow
all notes and steps carefully. Failure to follow step instructions may
result in incorrect operation of the restraint system and increases the
risk of serious personal injury or death in a crash...
Special Tool(s) /
General Equipment
Feeler Gauge
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Use a Straightedge that is calibrated by the
manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of
length, such as Snap-On® GA438A or equivalent...