Lincoln Corsair: Evaporative Emissions - 2.0L EcoBoost (177kW/240PS) – MI4 / Description and Operation - Evaporative Emissions - Overview
Overview
The EVAP
system prevents hydrocarbon emissions from entering the atmosphere by
storing fuel vapors and routing the vapors to the engine to be consumed
during normal engine operation.
The EVAP system consists of:
-
EVAP canister
-
EVAP canister purge valve
-
EVAP canister vent solenoid
-
EVAP blocking valve
-
Fuel Tank Pressure (FTP) sensor and tube
-
Easy Fuel (capless) fuel tank filler pipe
System Operation
System Diagram
Item
Description
1
Air Cleaner (ACL) outlet pipe
2
EVAP ejector
3
Turbocharger to CAC tube
4
Check valve
5
EVAP purge valve
6
Check valve
7
Intake manifold
8
Fuel tank filler pipe
9
EVAP canister
10
Fuel vapor vent valve
11
Fue..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02)
.
Remove the push pins, the screws and the lower bumper
cover bracket assembly. Position the hands-free liftgate actuation lower
sensor aside.
Remove electrical c..
The RDU is available with 2.58 drive ratio.
Rear Drive Axle and Differential
The rear drive axle and differential unit (RDU ) is a cast aluminum
differential assembly located in the rear of the vehicle consisting of
the following components:
Crown wheel and pinion
An electrically activated and mechanically engaged
clutch pack acting on the rear drive axles, that applies or removes..