Lincoln Corsair: Automatic High Beam Control
What Is Automatic High Beam Control
The system turns on high beams if it is dark
enough and no other traffic is present. If it
detects an approaching vehicle’s headlamps
or tail lamps, or street lighting ahead, the
system turns the high beams off. Low beams
remain on.
A camera sensor, centrally mounted behind
the windshield of your vehicle, continuously
monitors conditions to turn the high beams
on and off.
Use the touchscreen to select the following:
Select the settings option on
the
feature bar.
Select ambient lighting.
Switching Ambient Lighting On
Touch a color once...
WARNING: Do not use the system in
poor visibility, for example fog, heavy rain,
spray or snow.
Press Settings on the touchscreen.
Press Vehicle.
Press Lighting...
Other information:
Removal
WARNING:
The following procedure prescribes critical repair steps
required for correct restraint system operation during a crash. Follow
all notes and steps carefully. Failure to follow step instructions may
result in incorrect operation of the restraint system and increases the
risk of serious personal injury or death in a crash...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
Module
DTC
Description
Action
BCM
B130F:12
Run Accessory Control: Circuit Short To Battery
GO to Pinpoint Test A
BCM
B130F:14
Run Accessory Control: Circuit Short To Ground Or Open
GO to Pinpoint Test A
BCM
B13A4:11
Front ..