Lincoln Corsair: Capacities and Specifications / Capacities and Specifications - 2.3L
Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage that your vehicle warranty does not cover.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Air Conditioning System
WARNING: The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
Capacities
Materials
Engine Coolant
Capacities
Materials
Engine Oil
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SP requirements and display the API Certification Mark for gasoline engines.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage not covered by your vehicle warranty.
Capacities
Materials
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22°F (-30°C) or below.
Materials
Fuel Tank
Capacities
Grease
Materials
Hydraulic Brake System
Materials
Note: We recommend using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid could cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials could result in brake system damage and possible failure.
Locks
Materials
Washer Reservoir
Capacities
Materials
Capacities and Specifications - 2.0L
Use oil and fluid that meets the defined
specification and viscosity grade.
If you do not use oil and fluid that meets the
defined specification and viscosity grade, it
could result in:
Component damage that your vehicle
warranty does not cover...
Capacities and Specifications - 2.5L, Plug-In Hybrid Electric Vehicle (PHEV)
Use oil and fluid that meets the defined
specification and viscosity grade.
If you do not use oil and fluid that meets the
defined specification and viscosity grade, it
could result in:
Component damage that your vehicle
warranty does not cover...
Other information:
Lincoln Corsair 2020-2026 Owners Manual: Passive Key
Note: You may not be able to shift out of park (P) unless the passive key is inside your vehicle. Your remote control operates the power locks, remote start system, and liftgate. Your remote control must be in your vehicle to activate the push button start...
Lincoln Corsair 2020-2026 Owners Manual: Power Steering Fluid Check. Changing the 12V Battery
Power Steering Fluid Check Your vehicle is equipped with an electric power steering (EPS) system. There is no fluid reservoir to check or fill. Changing the 12V Battery WARNING: Batteries normally produce explosive gases which can cause personal injury...
Categories
- Manuals Home
- 1st Generation Lincoln Corsair Owners Manual
- 1st Generation Lincoln Corsair Service Manual
- Opening and Closing the Hood
- Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40
- Refueling - Gasoline
- New on site
- Most important about car
Selecting a Drive Mode. DRIVE MODES
Selecting a Drive Mode
Note: Drive mode changes may not be available when the ignition is off.
