Preliminary Inspection
Visually inspect the CV joints, housing, boots, and clamps for obvious signs of mechanical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...
Other information:
System Operation
System Diagram
Item
Description
1
PCM
2
Starter relay
3
Starter motor
4
BCM
5
Automatic transmission
6
Ignition switch
Network Message Chart
Module Network Input Messages Powertrain Control Module (PCM)
Broadcast Message
Originating Modul..
Special Tool(s) /
General Equipment
Hose Clamp Remover/Installer
Removal
NOTICE:
During engine repair procedures, cleanliness is extremely
important. All parts must be thoroughly cleaned and any foreign
material, including any material created while cleaning gasket surfaces,
that enters the oil passages, coolant passages or the oil pan, can
cause engine failure.
NOTICE:
Th..