Other information:
DISASSEMBLY
NOTE:
If the piston and connecting rod are to be reinstalled, they
must be assembled in the same orientation. Mark the piston orientation
to the connecting rod reassembly.
Remove the piston rings and discard.
Remove the piston pin retainers and discard...
The recommended tire inflation pressures
are found on the Tire Label which is located
on the B-pillar or the edge of the driver door.
This information can also be found on the
Safety Compliance Certification Label, affixed
to either the door hinge pillar, door-latch
post, or the door edge that meets the
door-latch post; next to the driver’s seating
position...