Lincoln Corsair Manuals

Lincoln Corsair: Transmission Cooling - 8-Speed Automatic Transmission – 8F35/8F40 / Removal and Installation - Transmission Fluid Auxiliary Cooler

Removal

  1. Remove the A/C condenser.
    Refer to: Condenser - 2.0L EcoBoost (177kW/240PS) – MI4 (412-00 Climate Control System - General Information, Removal and Installation).
    Refer to: Condenser - 2.3L EcoBoost (199kW/270PS) (412-00 Climate Control System - General Information, Removal and Installation).
  1. Release the clips and remove the transmission fluid cooler from the radiator.

Installation

  1. Install the transmission fluid cooler to the radiator and engage the clips.
  1. Install the A/C condenser.
    Refer to: Condenser - 2.0L EcoBoost (177kW/240PS) – MI4 (412-00 Climate Control System - General Information, Removal and Installation).
    Refer to: Condenser - 2.3L EcoBoost (199kW/270PS) (412-00 Climate Control System - General Information, Removal and Installation).

    General Procedures - Transmission Fluid Cooler - Backflushing and Cleaning

    Special Tool(s) / General Equipment Transmission Cooling System Heated Flusher Materials Name Specification Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV WSS-M2C949-A, MERCON® ULV  Flushing NOTE: The cooler bypass valve cannot be backflushed...

    Removal and Installation - Transmission Fluid Cooler Tubes

    Materials Name Specification Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV WSS-M2C949-A, MERCON® ULV  Removal With the vehicle in N , position it on a hoist...

    Other information:

    Lincoln Corsair 2020-2025 Service Manual: Description and Operation - Jacking and Lifting - Overview


    Jacking and Lifting Points NOTE: 4WD shown, FWD similar. Only the specified jacking points may be used for jacking and supporting the vehicle.   WARNING: Before raising the vehicle on a hoist, make sure the hoist capacity is adequate for the vehicle weight, including any vehicle cargo or modifications...

    Lincoln Corsair 2020-2025 Service Manual: Removal and Installation - Intake Air Temperature (IAT) Sensor


    Removal NOTE: Removal steps in this procedure may contain installation details. Disconnect the IAT electrical connector. Remove the IAT sensor. Installation To install, reverse the removal procedure...

    Categories

    Keyless Starting

    Note: The keyless starting system may not function if the key is close to metal objects or electronic devices such as cellular phones.

    Note: A valid key must be located inside your vehicle to switch the ignition on and start the engine.

    Ignition Modes

    Lincoln Corsair. Keyless Starting

    read more

    Copyright © 2025 www.licorsair.com