Lincoln Corsair: Rear Seats / Removal and Installation - Power Fold Seat Control Switch
Removal
-
Remove the load space trim panel.
Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
-
Remove the power fold seat control switch.
-
Depress the retaining clips.
-
Position out of the load space trim panel.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
The heated rear seat module is located under the LH (left hand) rear seat cushion substrate.
Remove the heated rear seat module...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear seat cushion and cover as an assembly.
Refer to: Rear Seat Cushion Cover (501-10B Rear Seats, Removal and Installation)...
Other information:
System Diagram
Item
Description
1
SSB
2
SSC
3
SOWC
4
SSE
5
SSF
6
LPC
7
TSS
8
ISS
9
Transmission
10
Transmission
11
TFT
12
TRS
13
SSA
14
PCM
15
TCC
16
OSS
Network Message Chart
Broadcast Message
Originating Module
Message Purpose
Engine speed
PCM
Directly a..
Materials
Name
Specification
Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A
ESA-M1C200-AESE-M1C171-A
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTICE:
Do not pull the engine appearance cover forward or
sideways to remove. Failure to press straight upward on the underside of
the cover at the a..