Lincoln Corsair: Front Seats / Removal and Installation - Front Seat Cushion Adjuster - Vehicles With: Multi-Contour Seats
Removal
NOTE:
Driver seat shown, passenger seat similar.
-
Remove the front seat cushion cover.
Refer to: Front Seat Cushion Cover - Vehicles With: Multi-Contour Seats (501-10A Front Seats, Removal and Installation).
Cushion adjuster
-
Remove the front seat cushion blower motor.
-
Disconnect the electrical connector.
-
Rotate the front seat cushion blower motor 45 degrees clockwise.
-
NOTE:
After disconnecting the hose and lock assembly,
verify the black O-ring and white spacer remains with each hose.
NOTE:
When connecting the hose and lock assemblies, an audible click must be heard for correct installation.
Detach the front seat cushion adjuster hose assembly.
-
Release the locking tab and disconnect the front seat cushion adjuster hose assembly from the SCMG .
-
Detach the retainers and position the front seat cushion adjuster hose assembly aside.
-
Detach the front seat cushion adjuster retainers.
-
Lift the front seat cushion adjuster bladders.
-
Detach the retainers.
-
Detach the front seat cushion blower motor duct.
-
Route out the hoses and remove the front seat cushion adjuster.
Cushion side bolster
-
Release the front seat cushion cover from the retainers.
-
Release the front seat backrest cover tabs.
-
Release the hook-and-arrows and remove the front seat cushion cover carrier.
-
Detach the retainers and remove the front seat cushion side bolster.
Installation
-
To install, reverse the removal procedure.
Removal
NOTE:
Driver side shown, passenger side similar.
Remove the front door trim panel.
Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the front seat.
Refer to: Front Seat (501-10A Front Seats, Removal and Installation)...
Other information:
WARNING: You are responsible for
controlling your vehicle at all times. The
system is designed to be an aid and does
not relieve you of your responsibility to
drive with due care and attention. Failure
to follow this instruction could result in the
loss of control of your vehicle, personal
injury or death...
Power Steering Fluid Check
Your vehicle is equipped with an electric
power steering (EPS) system. There is no
fluid reservoir to check or fill.
Changing the 12V Battery
WARNING: Batteries normally
produce explosive gases which can cause
personal injury...
Categories
P215/65R15 95H is an example of a tire
size, load index and speed rating. The
definitions of these items are listed
below. (Note that the tire size, load index
and speed rating for your vehicle may
be different from this example.)
P: Indicates a tire, designated by the
Tire and Rim Association, that may be
used for service on cars, sport utility
vehicles, minivans and light trucks. Note:
If your tire size does not begin with a
letter this may mean it is designated by
either the European Tire and Rim
Technical Organization or the Japan Tire
Manufacturing Association.
215: Indicates the nominal width of
the tire in millimeters from sidewall edge
to sidewall edge. In general, the larger
the number, the wider the tire.
65: Indicates the aspect ratio which
gives the tire's ratio of height to width.
R: Indicates a radial type tire.
15: Indicates the wheel or rim
diameter in inches. If you change your
wheel size, you will have to purchase
new tires to match the new wheel
diameter.
95: Indicates the tire's load index. It
is an index that relates to how much
weight a tire can carry. You may find this
information in your owner’s manual. If
not, contact a local tire dealer.
read more