Lincoln Corsair: Automatic Transmission External Controls - 8-Speed Automatic Transmission – 8F35/8F40 / Removal and Installation - Downshift Paddle Switch
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the driver airbag.
Refer to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation).
-
Remove the downshift paddle switch.
-
Disconnect the electrical connector.
-
Remove the retainer and the downshift paddle switch.
Torque:
44 lb.in (5 Nm)
Installation
-
To install, reverse the removal procedure.
Activation
NOTE:
If the vehicle battery is dead or there is no electrical power available, connect an external power source.
Apply the parking brake...
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
Remove the FCIMB .
Refer to: Front Controls Interface Module B (FCIMB) (415-00 Information
and Entertainment System - General Information, Removal and
Installation)...
Other information:
WARNING: Do not place objects or
mount equipment on or near the airbag
cover, on the side of the front or rear
seatbacks, or in areas that may come into
contact with a deploying airbag. Failure to
follow these instructions may increase the
risk of personal injury in the event of a
crash...
Special Tool(s) /
General Equipment
Vehicle/Axle Stands
Removal
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
NOTICE:
Make sure that the insulator pads are correctly positioned to prevent direct contact with other components...