Lincoln Corsair: Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40 / Removal and Installation - Auto-Start-Stop Accumulator Solenoid
Materials
Name |
Specification |
Petroleum Jelly |
-
|
Removal
-
Remove the auto-start-stop accumulator.
Refer to: Auto-Start-Stop Accumulator (307-01A Automatic Transmission -
8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
Refer to: Auto-Start-Stop Accumulator (307-01A Automatic Transmission -
8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
-
Remove the bolts and the auto-start-stop accumulator solenoid.
Installation
-
Lubricate the auto-start-stop accumulator solenoid O-rings with petroleum jelly.
Material: Petroleum Jelly
-
Install the auto-start-stop accumulator solenoid and the bolts.
Torque:
24 lb.in (2.75 Nm)
-
Install the auto-start-stop accumulator.
Refer to: Auto-Start-Stop Accumulator (307-01A Automatic Transmission -
8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
Refer to: Auto-Start-Stop Accumulator (307-01A Automatic Transmission -
8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
Special Tool(s) /
General Equipment
307-771Accumulator Release Pin
Materials
Name
Specification
Petroleum Jelly
-
Removal
Remove the battery tray...
Special Tool(s) /
General Equipment
205-153
(T80T-4000-W)
Handle
307-758Installer, Axle Seal -FWD
Flat Headed Screw Driver
Removal
With the vehicle in NEUTRAL, position it on a hoist...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the brake disc.
Refer to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation).
Remove the brake disc shield.
Torque:
80 lb...
Removal
NOTICE:
The turbocharger compressor vanes can be damaged by even the
smallest particles. When removing any turbocharger or engine air intake
system component, ensure that no debris enters the system. Failure to
do so may result in damage to the turbocharger...