Lincoln Corsair: MyKey™ / MyKey – Troubleshooting
MyKey – Information Messages

MyKey – Frequently Asked Questions
What is an admin key?
- An admin key is a key that you have not
created as a MyKey. See Creating a MyKey.
Why am I not able create a MyKey?
- You did not place the admin key in the
backup position. See Creating a MyKey.
- You did not use an admin key to switch
the ignition on.
- The key used to switch the ignition on is
the only admin key. At least one key
needs to remain as an admin key.
- You did not switch the ignition off after
creating the last MyKey.
Why am I not able to program a MyKey?
- The admin key is not inside your vehicle.
- The key used to switch the ignition on is
not an admin key.
- You have not created any MyKeys. See Creating a MyKey.
Why am I not able to clear the MyKeys?
- The admin key is not inside your vehicle.
- The key used to switch the ignition on is
not an admin key.
- You have not created any MyKeys. See Creating a MyKey.
Why is the MyKey distance not accumulating?
- The key used to start the engine is an
admin key.
- An admin key and a MyKey are inside
your vehicle.
- You have not created any MyKeys. See Creating a MyKey.
- You have cleared the MyKeys.
Why am I not able to start the engine with a MyKey?
- An admin key and a MyKey are inside
your vehicle.
Creating a MyKey
Open the center console lid.
Place the passive key in the position
shown.
Switch the ignition on.
Press Settings on the touchscreen...
You can use the power door lock or the
remote control to lock and unlock your
vehicle.
Note: Do not use the door latch assembly
to attach any accessory, such as handles or
steps, as this can cause damage to your
vehicle...
Other information:
VEHICLE SOFTWARE END USER
LICENSE AGREEMENT (EULA)
You (“You” or “Your” as applicable) have
acquired a vehicle having several
devices, including SYNC ® and various
control modules, ("DEVICES") that include
software licensed or owned by Ford
Motor Company and its affiliates ("FORD
MOTOR COMPANY")...
Check
NOTICE:
Non-Hunter brand balancers will not include the Ford-approved procedure for match-mounting in their software.
NOTICE:
Other balancing procedures that exist on non-Hunter brand equipment are not Ford approved and should not be used...