Lincoln Corsair: Handles, Locks, Latches and Entry Systems / General Procedures - Staged Unlock Programming
Activation
-
With the ignition in OFF, press the LOCK and UNLOCK buttons on the RKE transmitter simultaneously for 4 seconds.
-
The turn signals flash twice to indicate the mode change.
-
Repeat these steps to enable/disable the staged unlocking feature.
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Interior Trim Remover
Activation
Remove the liftgate latch access cover from the center of the liftgate trim panel...
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Repair individual door lock cylinders by discarding the
inoperative door lock cylinder and building a new door lock cylinder
using the appropriate lock repair service kit...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the driver airbag.
Refer to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation).
Remove the upshift paddle switch...
Transmission Overview
The Electronically Controlled Continuously Variable Transmission (eCVT) has the following internal components:
Traction Motor
Generator/Starter
High voltage terminals
Pump and filter assembly
Park lock actuator
TFT sensor
Planetary carrier
Differential carrier
High voltage inductor
Transmission fluid auxiliary pump
..