Lincoln Corsair: Wipers and Washers / Removal and Installation - Rear Window Wiper Pivot Arm
Special Tool(s) /
General Equipment
Removal
-
Open the rear pivot arm nut cover.
-
Remove the rear wiper pivot arm nut.
-
Remove the rear wiper pivot arm.
Use the General Equipment: Two Leg Puller
Installation
-
Verify the rear window wiper motor is in the PARK position.
-
Turn the ignition ON
-
Operate the switch ON then OFF to cycle the rear window wiper motor.
-
Turn the ignition OFF.
-
Install the rear wiper pivot arm.
-
Align the wiper blade with the mark on the glass.
-
Install the rear wiper pivot arm nut.
Torque:
133 lb.in (15 Nm)
-
Close the rear wiper pivot arm nut cover.
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear window wiper pivot arm.
Refer to: Rear Window Wiper Pivot Arm (501-16)
...
Materials
Name
Specification
Motorcraft® Premium Windshield Wash Concentrate with BitterantZC-32-B2
WSS-M14P19-A
Removal
Remove the windshield washer reservoir...
Other information:
WARNING: The tire pressure
monitoring system is not a substitute for
manually checking tire pressures. You
should periodically check tire pressures
using a pressure gauge. Failure to correctly
maintain tire pressures could increase the
risk of tire failure, loss of control, vehicle
rollover and personal injury...
Overview
The transmission fluid cooling system consists of the following:
Transmission fluid cooler tubes
Transmission fluid cooler
Transmission fluid auxiliary pump
Transmission fluid auxiliary pump inlet tube
This
vehicle is equipped with an external transmission fluid cooler...