Lincoln Corsair Manuals

Lincoln Corsair: Active Park Assist / Exiting a Parking Space

Active park assist only assists leaving parallel parking spaces.

  1. Press the active park assist button.
  2. Press the active park assist icon on the touchscreen.
  3. Select parallel park exit.
  4. Use the turn signal to choose the direction to exit the parking space.
  5. Press and hold the brake pedal.
  6. Release the steering wheel and shift into neutral (N).
  7. Release the parking brake.
  8. Press and hold the active park assist button.
  9. Release the brake pedal to allow your vehicle to move.

    Note: After active park assist drives your vehicle to a position where you can exit the parking space in a forward movement, a message appears instructing you to take full control of your vehicle.

  10. Take control of your vehicle.

    Note: You can slow down your vehicle at any time by pressing the brake pedal.

    Entering a Perpendicular Parking Space

    Press the active park assist button.Note: Active park assist does not recognize parking space lines and centers your vehicle between objects. Press the active park assist icon on the touchscreen...

    Active Park Assist – Troubleshooting

    Active Park Assist – Information Messages Active Park Assist – Frequently Asked Questions Why does active park assist not operate correctly? The system is unable to detect a vehicle, curb or object to park next to or in between...

    Other information:

    Lincoln Corsair 2020-2025 Service Manual: Description and Operation - Pump Assembly


    Fluid Pump and Transmission Fluid Filter Components Item Description 1 Transmission fluid filter 2 Transmission fluid filter seal 3 Pump assembly 4 Stator seal 5 Turbine seal Mechanical Operation The transmission fluid in the sump area at the bottom of the transmissio..

    Lincoln Corsair 2020-2025 Service Manual: Removal and Installation - Hood Latch Release Cable


    Removal Front Cable Remove the hood latch. Refer to: Hood Latch (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). Open the hood latch release cable junction block cover and disconnect the front hood latch release cable. Release the clips on the hood latch release cable junction block cover. Open the hood latch release cable..

    Categories

    Keyless Starting

    Note: The keyless starting system may not function if the key is close to metal objects or electronic devices such as cellular phones.

    Note: A valid key must be located inside your vehicle to switch the ignition on and start the engine.

    Ignition Modes

    Lincoln Corsair. Keyless Starting

    read more

    Copyright © 2025 www.licorsair.com