Lincoln Corsair: General Information / Description and Operation - Engine Cooling System Health and Safety Precautions
WARNING:
Always allow the engine to cool before opening the cooling
system. Do not unscrew the coolant pressure relief cap when the engine
is operating or the cooling system is hot. The cooling system is under
pressure; steam and hot liquid can come out forcefully when the cap is
loosened slightly. Failure to follow these instructions may result in
serious personal injury.
WARNING:
Do not work on the fuel system until the pressure has been
released and the engine has cooled. Fuel in the high-pressure fuel
system is hot and under very high pressure...
WARNING:
Before working on or disconnecting any of the fuel tubes or fuel
system components, relieve the fuel system pressure to prevent
accidental spraying of fuel...
Other information:
Special Tool(s) /
General Equipment
Vehicle/Axle Stands
Removal
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
NOTICE:
Make sure that the insulator pads are correctly positioned to prevent direct contact with other components...
HF45 Transmission
Item
Part Number
Description
1
70487048
Input shaft oil seal
2
11771177
Right Hand (RH) halfshaft seal
3
----
Damper housing/cover assembly to transmission case bolts (27 required)
4
79757975
Damper housing
5
7F4097F409
Transmission oil sump baffel
6
7D2887D288
Oil collector plate
7
7D288..