Lincoln Corsair: General Information / Description and Operation - Diesel Fuel System Health and Safety Precautions
WARNING:
Do not work on the fuel system until the pressure has been
released and the engine has cooled. Fuel in the high-pressure fuel
system is hot and under very high pressure. High-pressure fuel may cause
cuts and contact with hot fuel may cause burns. Failure to follow these
instructions may result in serious personal injury.
This
document provides critical diagnostic knowledge required for successful
repair outcomes. It identifies technical competencies expected by users
of this manual...
WARNING:
Always allow the engine to cool before opening the cooling
system. Do not unscrew the coolant pressure relief cap when the engine
is operating or the cooling system is hot...
Other information:
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Spherical Cutter
Hot Air Gun
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055
-
Flexible Foam Repair3M™ 08463, LORD Fuso..
WARNING:
Do not use any fluid other than clean brake fluid meeting
manufacturer's specification. Additionally, do not use brake fluid that
has been previously drained. Following these instructions will help
prevent system contamination, brake component damage and the risk of
serious personal injury.
WARNING:
Do not breathe dust or use compressed air to blow dust from ..