Lincoln Corsair: Lighting / Direction Indicators. Welcome Lighting
Direction Indicators
Push the lever up or down to use
the direction indicators.
Indicating a Lane Change
Tap the lever up or down to make the direction indicators flash three times to indicate a lane change.
Welcome Lighting (IF EQUIPPED)
The Lincoln welcome mat projection lights are on the bottom of the exterior mirror housings. They project an image onto the ground a short distance from your vehicle when welcome lighting or lighted entry turns on.
For auto-fold mirrors, the Lincoln welcome mat turns on when welcome lighting or lighted entry turns on and the mirrors fold in upon locking or using the switch on the door.
Note: Moisture, frost and ice build-up or other types of contamination on the surface of the light lens can cause non-permanent distortion or reduced brightness of the image. Do not use abrasive materials to clean the lens.
Note: If you enable auto-fold and then you fold the mirrors in to the door window glass, the welcome mats do not turn on.
Switching the Welcome Lighting On or Off
Use the touchscreen to select the following:
- Select Settings.
- Select Vehicle.
- Select Lighting.
Adaptive Headlamps (IF EQUIPPED)
About Adaptive Headlamps
The headlamps are designed to adapt when
you are steering around a curve, or if the
camera detects lane markings indicating a
curve or traffic signs indicating an
intersection...
Interior Lamps
The lamps turn on under the following
conditions:
You open any door.
You press a button on the remote control.
You press the all lamps on button on the
overhead console...
Other information:
Lincoln Corsair 2020-2023 Owners Manual: Engine Specifications
2.0L Drivebelt Routing The long drivebelt is on the first pulley groove closest to the engine. The short drivebelt is on the second pulley groove farthest from engine. 2.3L Drivebelt Routing The long drivebelt is on the first pulley groove closest to the engine...
Lincoln Corsair 2020-2023 Service Manual: Description and Operation - External Controls - System Operation and Component Description
System Diagram Item Description 1 GSM 2 GWM 3 RCM 4 IPC 5 PCM 6 BCM 7 Driver 8 Door 9 Latch 10 Brake 11 On/Off (BOO) 12 Switch Network Message Chart Broadcast Message Originating Module Message Purpose Brake switch position BCM Input from brake switch necessary to change gears...
Categories
- Manuals Home
- 1st Generation Lincoln Corsair Owners Manual
- 1st Generation Lincoln Corsair Service Manual
- Remote Start Settings
- Auto Hold (IF EQUIPPED)
- Head Up Display
- New on site
- Most important about car
Keyless Starting
Note: The keyless starting system may not function if the key is close to metal objects or electronic devices such as cellular phones.
Note: A valid key must be located inside your vehicle to switch the ignition on and start the engine.
Ignition Modes
