Lincoln Corsair: Steering Wheel / Resetting the Stopping Position - Vehicles With: Power Adjustable Steering
Column. Horn. Switching the Heated Steering Wheel On and Off
Resetting the Stopping Position - Vehicles With: Power Adjustable Steering
Column
Note: The steering wheel stops when it
detects an obstruction. This sets a new
stopping position.
To reset the steering column to its normal
stopping position:
- Confirm there is nothing obstructing the
motion of the steering column.
- Press and hold the steering column
control until the steering column stops
moving.
- Press the steering column control again.
- Note: The steering column may start to move
again.
- When the steering column stops,
continue holding the control for a few
seconds.
- Repeat for each direction, as necessary.
Horn
Press on the center of the
steering
wheel near the horn icon to
activate the horn.
Switching the Heated Steering Wheel On and Off (IF
EQUIPPED)
To activate the heated steering
wheel, press the button on the
climate control unit.
On some vehicles, an indicator on the button
illuminates when the heated steering wheel
is on.
Note: A sensor regulates the temperature
of the steering wheel.
WARNING: Do not adjust the steering
wheel when your vehicle is moving.
Note: Make sure that you are sitting in the
correct position.
Unlock the steering column...
Other information:
Removal
NOTICE:
The turbocharger compressor vanes can be damaged by even the
smallest particles. When removing any turbocharger or engine air intake
system component, ensure that no debris enters the system. Failure to
do so may result in damage to the turbocharger.
NOTE:
Removal steps in this procedure may contain installation details.
Dislodge and relocate the air cleane..
Removal
WARNING:
The following procedure describes critical repair steps
required for correct seat component installation. Follow all notes and
steps carefully. Do not place any objects between the seat components
and the body of the vehicle, nor any objects within a joint internal to
the seat structure. Failure to follow step instructions may result in
incorrect operation of the ..