Lincoln Corsair: Fuel Charging and Controls - 2.0L EcoBoost (177kW/240PS) – MI4 / Removal and Installation - High-Pressure Fuel Pump Drive Unit
Removal
-
Remove the valve cover.
Refer to: Valve Cover (303-01A Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
-
Remove the high-pressure fuel pump drive unit bolts, then remove the high-pressure fuel pump drive unit.
Installation
-
Make sure that the mating faces are clean and free of
corrosion and foreign material. Install the high-pressure fuel pump
drive unit, then install and tighten the high-pressure fuel pump drive
unit bolts.
Torque:
97 lb.in (11.0 Nm)
-
Install the valve cover.
Refer to: Valve Cover (303-01A Engine - 2.0L EcoBoost (177kW/240PS) – MI4, Removal and Installation).
Removal
NOTICE:
Do not loosen any fittings or plugs on the high-pressure fuel pump.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation)...
Removal
Remove the charge air cooler (CAC) outlet pipe.
Refer to: Charge Air Cooler (CAC) Outlet Pipe (303-12A Intake Air
Distribution and Filtering - 2...
Other information:
Special Tool(s) /
General Equipment
300-OTC1585AEPowertrain Lift
Wooden Block
Removal
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems. Failure of these fasteners
may result in major service expense...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
PCM
P000A:00
'A' Camshaft Position Slow Response (Bank 1): No Sub Type Information
GO to Pinpoint Test HK
PCM
P000B..