Lincoln Corsair: Front Seats / Removal and Installation - Front Seat Power Lumbar Assembly
Removal
NOTE:
Driver seat shown, passenger seat similar.
-
Remove the front seat.
Refer to: Front Seat (501-10A Front Seats, Removal and Installation).
-
Remove the front seat backrest panel.
Refer to: Front Seat Backrest Panel (501-10A Front Seats, Removal and Installation).
-
Remove the front seat power lumbar assembly.
-
Disconnect the electrical connector.
-
Detach the retainer and position the heated seat electrical connector aside.
-
Detach the upper J-hooks.
-
Detach the lower retainers.
Installation
-
To install, reverse the removal procedure.
Removal
Passenger seat
Remove the OCS .
Refer to: Occupant Classification System (OCS) Sensor - Vehicles With:
Multi-Contour Seats (501-20B Supplemental Restraint System, Removal and
Installation)...
Removal
NOTE:
Driver seat shown, passenger seat similar.
Power lumbar assembly
Remove the SCMG .
Refer to: Driver Multi-Contour Seat Module [SCMG] - Vehicles With:
Multi-Contour Seats (501-10A Front Seats, Removal and Installation)...
Other information:
Materials
Name
Specification
Motorcraft® Orange Concentrated Antifreeze/CoolantVC-3-B
WSS-M97B44-D
Removal
WARNING:
Always allow the engine to cool before opening the cooling
system. Do not unscrew the coolant pressure relief cap when the engine
is operating or the cooling system is hot...
WARNING: This battery pack should
only be serviced by an authorized electric
vehicle technician. Improper handling can
result in personal injury or death.
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you open the
hood or have any service or repair work
completed...