Lincoln Corsair: Tire Pressure Monitoring System (TPMS) / Description and Operation - Tire Pressure Monitoring System (TPMS) - Overview
Overview
The BCM uses tire pressure sensors to monitor tire pressure. The
sensors use radio signals to transmit the tire pressure to the RTM . The
RTM sends the information to the BCM over a LIN .
The tire pressure sensors are battery operated and mounted to the valve stems.
The IPC illuminates the TPMS
warning indicator and the message center displays a message when a
fault is present or when the tire pressure falls below the low pressure
limit.
System Operation
System Diagram
E344777
*.sttxt {
visibility: hidden;
}
*.stcallout {
visibility: visible;
}
1
TPMS
Sensor
2
TPMS
Sensor
3
TPMS
Sensor
4
TPMS
Sensor
5
GWM
6
BCM
7
IPC
Message
Center
Display..
Other information:
United States and Canada
WARNING: Changes or modifications
not expressively approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
The term "IC:" before the radio certification
number only signifies that Industry Canada
technical specifications were met.
FCC ID: NZLSAHL5D
IC: 4112A-SAHL5D
This device complies with Part 15 of the FCC
Rules ..
Lighting Control Selections
Press the toggle switch upward or downward
to make a selection.
Note: An indicator illuminates next to the
active selection.
Lamps off.
Parking lamps, instrument panel
lamps, license plate lamps and rear
lamps.
Autolamps.
Headlamps on.
Note: The lighting control defaults to
autolamps each time you switch your vehicle
on.
Switching High Beam Headlamps On and O..